[China Glass Net] The physical principle of the glass cleaning machine is that after the transducer converts high-frequency electrical energy into mechanical energy, it will generate high-frequency vibration with very small amplitude and propagate into the solution in the cleaning tank, in the role of the transducer. Underneath, the inside of the cleaning solution will continuously generate a large number of tiny bubbles and burst in an instant, and the bursting of each bubble will generate hundreds of degrees of high temperature and shock waves of nearly one thousand atmospheres, thereby flushing the workpiece. The advent of glass washers provides convenience for special equipment for cleaning and drying glass surfaces in the pre-process of deep processing such as mirror making, vacuum coating, tempering, hot bending, and hollow glass splicing.
So what should we pay attention to when using a glass washer?
1. Since the glass washer is operated by the button, it is necessary to pay attention to first open the blower and then open the heater. Turn off the heater first, then turn off the blower. We must not forget this order.
2, the glass washer must stop the speed regulator when the motor is stopped, or there will be unnecessary trouble.
3, glass cleaning machine glass discharge is regular, must be discharged at the specified limit.
4, the glass washer motor has an emergency stop button above, can be used in emergency situations, usually do not touch.
5. Glass cleaning machine When the thickness of the glass plate changes, it is necessary to adjust the level of the air knife in time, or it may cause unnecessary damage accidents.
6. When the glass washing machine enters the water, the water level is controlled between 200-250mm. It is not allowed to add water at high or low level.
SHAOXING OCEAN CO., LTD , https://www.sxgarments.com