[China Glass Net] Suggestions are as follows: 1. The cutter head has a large amount of oil and a lot of oil. This leads to incomplete cleaning during the washing stage. It is recommended to use a special cutting oil and reduce the amount of cutting oil, and the width is controlled within the range of the film removal. 2. The water in the water tank of the edging machine is lubricated with many microorganisms. It is recommended to add the 84 disinfectant during maintenance. Perform a water cycle to eliminate microorganisms in the water. 3. Add a photoelectric induction flushing pipe at the end of the edger to help improve the cleaning efficiency of the processor. 4. The washing section should be cleaned with pure water. Pure water should be replaced at least 8 hours. Ordinary tap water can be used in the grinding section, and it is recommended to use the pure water replaced by the washing piece. 5. After the washing is completed, in the glass receiving and placing part, the glass should be separated from each other by cork mat. The purpose of doing this is to further dry the internal water stains. 6, wash the end of the fragment, the glass receiver should wear a mask to prevent people from splashing saliva. 7. The entrance of the dryer bellows at the washing section should be covered with non-woven fabric or filter cotton and should be replaced regularly. The reasons are as follows: the dust inside the factory is large, and if it is not cleaned or replaced for a long time, a watermark with dust will be formed on the surface of the glass. 8. The brush of the processor should use a soft brush to control the rotation speed. The brush should be washed once a week with a high pressure water gun. Low-E washing speed is 2/3 of white glass. 9. Strengthen personnel safety awareness, and some process operations and personnel labor protection supplies should be used as required. 10. Strengthen the awareness of equipment maintenance, and require personnel to regularly maintain and supervise and inspect according to the maintenance plan.
Super Soft Short Plush with Brushed Fleece Blanket have the following characteristics: The appearance is light and clean, with good air permeability and drape.Soft, light and transparent texture, feel smooth and elastic. It feels very comfortable and elegant on the body. After high temperature shrinkage treatment, not easy to deformation and wrinkle. Good physical properties, high fiber strength, abrasion resistance, durable wear
Extra Soft Blanket,Super Soft Fleece Blanket,Super Soft Plush Blanket,Super Soft Throw Blanket
SHAOXING BOLIHAO HOME TEXTILES CO.,LTD , https://www.bolihao.com